anyone have a better idea than the wire clips that hold the spark plug cap on? using the keleo exhaust ring on my FG-60,unless they are perfectly lined up they won't stay on.the engine is in a TF Corsair.the exhaust ring is small enough that the plug wires will rub on the ring.you turn them to clear and maybe one side of the clip does grab.still not good,its gonna vibrate off.maybe if the ring was bigger in Dia.,it might stay on.who ever came up with this idea would probably have a hard time building a ham sandwich.has to be a better way.a few pages back,someone was grinding some off the bottom of the cap and was wondering if that worked.any ideas?