RCU Forums - View Single Post - Sig vs. Midwest Citabria
View Single Post
Old 10-18-2003 | 07:28 PM
  #16  
Miloh
Senior Member
 
Joined: May 2003
Posts: 843
Likes: 0
Received 0 Likes on 0 Posts
From: Springfield, TN,
Default RE: Sig vs. Midwest Citabria

Gimpy55:
My fuse with 21st century fabric, 2 mini servos, 1 standard servo, Rx, and battery pack comes in at 1 pound 10 ounces. The wing with 2 standard servos comes in at 1 pound 1/2 ounce. this is less than 3 pounds. I still have to put the wheels and the cowl on but I can't see this thing weighing in at any more than about 4 pounds less the motor. I could be off by maybe a half a pound or so. this is a pound less than my Avistar and my tower pro .46 had unlimited vertical on that plane.
I think a .46 will pull it fine for scale flight.

Miloh.