This is an old thread but thought I'd ask a question or two about this plane. I got it airframe only. It had been flown electric so gas tank is gone.
1. What size gas tank was original?
2. Motor: DLE 120
3. I'm thinking 29x9 Falcon CF prop (I'm more of a 3D guy, not so much Imac).
4. Servos
Ailerons - (4) HS-5645mg's (164 oz) kinda slow at 0.18s but that's ok as long as they're strong enough
Rudder - Savox 1270 (360-4... oz)
Elevator - Savox 1270's
Throttle - HS-485HB (90oz)
5. Smartfly Super Reg
6. I'll run one lipo through the regulator, no switches, for the whole dang plane, 2S-5000. I've done this on several 50cc planes (2s-3000) with good success.

Oh ya, I'm gonna smoke it too. ;-)

Thoughts on setup?

My main concern is gas tank size (this is my first 100cc plane) and servo choices. I hate to spend $80/servo when the 5645 ($40/servo) choice may work just fine too.