Originally Posted by
jeaton01
It's a Curtiss Challenger and it was a bad idea. They left out the center bearing a twin row radial normally has so the cylinder banks are close together. But it is still a twin row made of two 3 cylinder banks. Crank shaft life was not good.
Might as well sign me up, I sell plans as Golden Era Model Service. Doing more old timer types right now but I have a 1/4 scale Dart underway too, building it up from new laser cut parts to make sure they are right. Hi, Nigel.
Well since you asked you're in at No. 32! How about a shameless plug of your plan service URL?
Mike
FlyerInOKC (Mike) No. 1
TomCrump (Tom) No 2
Melchizwdek (Kevin) No. 3
Landeck (Bruce) No. 4
Chris Kraft aka Epoxyearl No. 5
Lifer No. 6
Monocoupe (Nigel) No. 7
DGrant No. 8
Grotto2 No. 9
Flyingagin (Ken) No. 10
Foodstick No. 11
Rogergh (Roger) No. 12
Triumphman (Mike Brennan) No. 13
RDJeff No. 14
Roadhawgy No. 15
Skylark-flier (Dave W.) No. 16
RBACONS No. 17
Stevegauth30 No. 18
Wing2an3 N0. 19
Don Olsen No. 20
Rocketman612 (Pete) No. 21
Geoardsog5 No. 22
Dowmer No. 23
Jimbrock2 No. 24
Jeffo No. 25
EJWash1 No. 26
GoldenAge No. 27
manifold No. 28
SPACE COWBOY No 29
smkrcflyer No 30
deanz406 No 31
jeaton01 No. 32 (John Eaton)