I posted in the JetCat forum above.
Since I have an engine down there right now, I took Dennis's post at face value and called asking for Dennis or John. I was told that Dennis was busy and John wasn't there anymore.
Now I had a hard landing with my KingCat, but the engine was still running and I found no exterior damage. I sent it to JetCat a week ago asking for an inspection, new starter O-ring and test run. I don't see why it couldn't get finished by Friday unless they found something haywire with the engine. If it gets shipped to Todd and then on to JetCat Germany as the post says above because Todd is not setup yet, I'm going to be really unhappy.
Last edited by Zeeb; 04-13-2016 at 11:10 AM.