Originally Posted by
Gambler71
Gaspar, I've just purchased a Xicoy FC1 from Nexus models here in the UK, but am struggling to get it to work. It has come with the V1.0 software/firmware.
1. Can you explain how to connect the FC1 up. I have a VT80, DX18G2 (TM1000 module) please.
2. Also where can I download the latest version of the software/firmware from?
My DX18G2 has been updated to v1.06a. I have one of your spektrum tm adapters and everything works fine. When I try to use the FC1 plus it powers up and reads all of the data on screen. The TM1000 is bound to the radio but I cannot see any turbine data on my DX18, all of the fields are blank. It's as if the FC1 is not providing an output.
Help please.
Thanks
Dave
Just to confirm now that Gaspar provided me with the link to the V1.2 software;
http://www.xicoy.com/catalog/product...95&language=en
Towards the bottom of the page you will find the link to the V1.2 zip file.
It appears for Spektrum users that you do require the V1.2 software to see the ECU/turbine data via the TM1000. With the V1.0 software all of the TM data fields on my DX18 were blank. With the new software everything now works fine.