Originally Posted by
Pork Chop
The fuse and tail are covered and the engine (e-flight power 25) is mounted, had I known about the Turnigy GliderDrive SK3 Competition Series motors I would have selected it. I bought the prop and spinner setup used on the e-flight Mystique because I knew the engine I selected was the same in the Mystique and it was only $25. All I have left is to finish the spoiler setup, finish sand and cover the main wing. Sad to not finish I know, I will finish it once I complete the Scepter.
The motor that is in the body is a shelled out "
Turnigy GliderDrive SK3 Competition Series 3850 3.5 960kv. I punched the shaft out of it with a hard nose landing. This motor was in my GP Spectra. So, I had to buy another one in May. So I used it to form the firewall and the nose of the E-Riser. And July 1, I will be ordering the same motor for the Riser. I would've ordered in June, but Hobby King didn't have the ESC in stock at the time.