Well, not much doing. Still working on the spoilers and spoiler bays. Got the spoiler platforms installed and glued into place. I put masking tape around the servo's and CA them into place. Left spoiler has been covered and attached to the spar so I can get the distant for the 1/2 inch sheet around the spoiler bay on the left wing.
Working on Right wing spoilers also. Did the same thing that I have done to the left. Have not covered the right spoiler yet. Will do that later on today.
Still working on sanding the right wing tip, that one is really making my hand hurt.
I know when I build the second Riser 100 this winter, I am going to have a couple of things to do the job with. Like this,
http://www.walmart.com/ip/Stanley-Ha...&wl13=&veh=sem
I used to have a razor planer, got me where that took off to.