I am interesting is sheeting two built up wing panels that are 24 inches in span with proskin (0.010 in thick) from Meek Reeves. I searched RCU and noticed that there are quite a few model with wings sheeted in this material. I also noticed there were a few posts recommending against it stating that the material is temperature sensitive and would warp. I would like to hear from the modelers who built there wings from this material on how it is holding up to the sun and their experience with it over time.

I am also thinking of using G10 material .010 in thick that is readily available here in the US. I suspect that G10 and proskin are the same type lamination.