RCU Forums - View Single Post - Sig Riser 100 electric Build
View Single Post
Old 09-02-2016, 07:40 AM
  #136  
Aquila1954
Senior Member
My Feedback: (1)
 
Aquila1954's Avatar
 
Join Date: Oct 2004
Location: La Vista, NE
Posts: 238
Likes: 0
Received 0 Likes on 0 Posts
Default E-Riser 100 Update:

My wings are almost covered. I brought in my radio case from the car. Other than carrying my radio, it also has my watt meter and the programming card in it to. So, I set the brake on the motor. I put on a 11x6 folding prop and tested it. Watts is around 225 and the amps around 19.1 on full throttle.
I have a Turnigy Glider Drive 960kv, Turnigy Plush 40Amp with 5v Bec, and a 2200 30C 3S Lipo's.

I am going to the LHS to get some stuff today and I want to get two sets of 12x6 props. And try it with the watt meter. I have a 13x7 on my GP Spectra. that I need to change back to 11x6. I broke the 11x6 last fall and that is the only one I had with me at the time. I should take it off and put a 11x6 back on it. Been lazy to do that. The 11x6 and 13x7 hulls that Spectra in the sky like nothing flat.