Jetcat ECU/Sensor Board Repair
Hey guys, I have a Jetcat P-140RX that I have plugged the lipo direct into the engine circuit board. Fried a diode, I believe it was a starter protection diode. I tried replacing it with a similar diode, but it still sends 12V directly to the starter motor. Burned out 2 motors already before I realized this. I could provide pics and all the info I have access to. It's just very tough without the schematics. The ECU is V10.8. Still have one more check I need to do with the FET's. But I'm afraid I need to take them out of the board in order to check them for shorts or opens.
Thanks,
John