RCU Forums - View Single Post - Tx & Rx Current Draw
View Single Post
Old 10-24-2003 | 08:43 PM
  #4  
Geistware
Senior Member
My Feedback: (16)
 
Joined: Apr 2002
Posts: 12,942
Likes: 0
Received 0 Likes on 0 Posts
From: Locust Grove, GA
Default RE: Tx & Rx Current Draw

My 9C draws about 280ma.
My servos (JR) draw about 10ma at idle but can draw as much as an amp under full load.
There really isn't a set value. You can map your draw over time and get an idea of your average for your flying style.


ORIGINAL: ED STEFAN

I'm looking for "approx" curent draw of both a computer type Tx, and a 4 channel RX.
I know this will vary from Tx make and how it's used, as is true for the Rx, however, I would like to closely emulate the discharge rate for both when I cycle the batteries. I'm using 400 Mah for the Rx and 500 Mah for the Tx. Does this sound close?