My apologies, I don't normally check my RCU private messages and so missed a couple of folks who were interested in the Simla kit I have. So I'll post a few photos and send replies to those who expressed interest.

To reiterate, I used the kit as a pattern to cut my own kit, so can assure that it's all there. I'll also include the 1/4" music wire rods I used to align the ribs - I build on an old steel door using magnets, and the rods worked well. If you use the ribs in the kit, you'll need to use some spacers as the kit rib holes are 5/16".

Box is 8"x8"x48" and weighs 12# 3oz, so figure a 13# shipping weight, shipping from zip 60540. Happy to answer any questions - promise to keep an eye on my PM's this time!

Bill

Update 30-December ... kit is sold.