I got my engine back from Horizon. Here is a picture of the master rod.
I remounted the engine and ran it per the video Raptormasque clued me into a couple pages back.
I was able to get the rpms in the range the video shows.
I did not interpret the instructions the way the video shows.
Ran 28oz through it and it still works!
I checked the temps while it was number one was at about 220, 2 an 3 were very cool at about 60.
About halfway through number 3 jumped to 140 for a bit then dropped back down.
With it so rich not sure the temps mean to much?
I will run another tank to complete the break in.
Kevin