I have a DLE-30, that I have had problems with almost from day one. I have replaced the Carb with a real Walbro Carb, replaced the hall senser and timed the engine. I have had on an engine run up stand for a while just to try get it running right. Yesterday I tried it again. Pull the plug to ensure I get a spark, ok got a spark, when removing the plug the cap separated, circle ring flew off. So I held it back together and used a hose clamp to hold it to the plug. Tested again for a spark, NO Spark.

On Mile High and Valley View sites sell a replacement caps. Both show the parts, which shows a resister or diod, (sorry about misspelled words). I am not sure where this resister/diod goes.

At this time I am about ready to buy a new engine, very frustrated.

Thanks
Rich