Originally Posted by RBACONS

Per Horizon Hobby Website:


Set Dual Rates to: HIGH 100% LOW 70%
1. Go to the SETUP LIST MENU
2. Set MODELTYPE: ACRO
3. Set REVERSE: Gear Channel
4. Go to ADJUST LIST MENU
5. Set TRAVEL ADJ: Gear/Fmode (0) Up Arrow 100%; Gear/Fmode (1) Down Arrow 23% FLAPS: (0) Up Arrow 0%; (1) Down Arrow 100%
6. Set FLAPS: NORM -40%; LAND -40%
7. Set MIX 1: ACT; Gear -> Gear ACT, RATE D 0%; U + 125%, SW FLAP, TRIM INH
8. Set MIX 2: ACT; Flap -> Flap ACT, RATE D +125%; U 0%, SW MIX, TRIM INH

Resulting in:
The Gear and Flap switches operate the 3 SAFE modes
Gear 0; Flap 0 = Beginner Mode
Gear 1; Flap 0 = Intermediate Mode
Gear 1; Flap 1 = Experienced Mode
The Mix switch operates AL/HP
Position 0, AL/HP off,
Momentarily in Position 1, HP on.
Hold in Position 1 for 4 seconds, AL on