I'm getting ready to mount up the running gear on the 5 1/10 scale Pz III variants I've been working on and I want to verify a couple of measurements.
I can look at this any number of ways to try to establish the proper layout of road wheels, tracks and sprockets. I need to make appropriate spacers.
I'm nearly ready to mount the final drives and only want to do it once.

I need one of the following please:

Distance between the center of the track guide horn and the side lower hull side plate.
Distance between inner road wheel flange and lower hull side plate
Distance between inner edge of track and lower hull side plate

I've measured 1/16 scale and 1/35 scale models and have a fair idea but would like to confirm. Times like this I really
miss Littlefield's collection as I could schedule a road trip and take the measurement right off his StuG III. Siiiigh.
I'll look again in my books and other resources but I don't think I have it documented

Any help would be appreciated.
Jerry