Originally Posted by
olnico
I did not achieve precise results with autotrim. I had to fine tune with manual trim.
Not knowing your setup.....If your looking at the trim page, scrolling to the right I always got with 1% then 50% for both side for the maiden since I don't have crooked airplane it's always more then sufficient, after the first day I fixes what ever I didn't like, like a heavy side or change the C&G the lower that to 25% for both and it stay there forever.....
To use it I just bump the sticks and it give me 1 or 2 step max at the time.....just like using the buttons.
I also redo the failsafe so my surface are neutral in case of......