I remember when you built that Tom. That was a pretty plane,what happened to it if you don't mind me asking? I'll look forward to your new project.
I'm getting all the small things done that are still on my punch list before the covering starts. In Photos 1-2, the glass cloth (shown) has been applied on the elevator joiner, a second coat of resin will follow.
Photo 3- The engine firewall has been primed and lightly sanded in preparation for the white epoxy paint I will spray on it. I will give the primer a couple of more days to dry before I do this.
The inside forward section of the fuselage has been fuel proofed using thinned out Finishing Resin.
Last edited by VincentJ; 02-16-2018 at 02:11 PM.