Okay guys,
First let me say Danny at Aeropanda was great helping me get the setup done so the gyro took the inputs but I must be missing something or I'm getting really OLD!!!!!
I am STUMPED, using a Futaba 14SG, channel 4 rudder, 8 for tail wheel linked. I get the gyro set and it will only drive the tail wheel servo, I have also tried using a "Y" connector and it's the same thing.
It does move the ailerons and elevators, more on the elevators than the ailerons but the aileron throw is only 1"
Really getting frustrated, was thinking it may be a bad battery but not sure
Any help would be greatly appreciated

Thanks in advance
Larry