RCU Forums - View Single Post - BJ Craft Element Setup
View Single Post
Old 05-03-2018 | 08:20 AM
  #7  
grotto2's Avatar
grotto2
My Feedback: (2)
 
Joined: Feb 2003
Posts: 1,046
Received 0 Likes on 0 Posts
From: Palm Bay, FL
Default

I just measured my nose ring with respect to the stab and got 2.5 degrees downthrust.
I also confirmed John Fuqua's measurement of -8.5 degrees on the left-hand canopy line.
My wing is sitting negative at this point on the factory holes and will need adjustment. My canalyzer is also sitting negative and tilted right, so it will need some saddle buildup.