RCU Forums - View Single Post - Zeus
Thread: Zeus
View Single Post
Old 05-19-2018 | 02:34 PM
  #103  
RodneyFord's Avatar
RodneyFord
 
Joined: Apr 2015
Posts: 424
Likes: 0
Received 1 Like on 1 Post
From: Lower Hutt New zealand
Default


Here is the second side before the inner layer of 26gm glass. High vacuum forces the rohacel to fully conform to the mold.




Excess resin is forced through the perforations into the peel ply. Before inserting the rohacel into the mold I deresined the glass with a couple of applications of paper towels.
RodneyFord is offline  
Reply Like