RCU Forums - View Single Post

06-12-2018 | 02:39 AM

#176

RodneyFord

Joined: Apr 2015

Posts: 424

Likes: 0

Received 1 Like on 1 Post

From: Lower Hutt New zealand

I've been able to have a rough balance up and the CofG is going to be pretty much where I designed it. So I can now make the UC legs. Here is the profile on the CNC foam cutting PC.

Cutting the extruded foam block.

Mylar Vac bagged onto it with PU glue.

Reply Like