RCU Forums - View Single Post

06-28-2018 | 09:29 PM

#209

RodneyFord

Joined: Apr 2015

Posts: 424

Likes: 0

Received 1 Like on 1 Post

From: Lower Hutt New zealand

Marked out the rear face of the prop. This sets the pitch. It is all basic trigonometry.

Cut close to the line.

Break it out with the chisel.

Sand it down. That angle grinder has made a lot of props.

Check the pitch and adjust accordingly.

Roughed out the front face. Ready for the airfoil templates.

Reply Like