RCU Forums - View Single Post - JTM 1.4M Composite Viper Jet 90mm
View Single Post
Old 07-20-2018, 07:48 AM
  #1  
MYHELL99
My Feedback: (47)
 
MYHELL99's Avatar
 
Join Date: Oct 2002
Location: Raleigh, NC
Posts: 78
Likes: 0
Received 1 Like on 1 Post
Default JTM 1.4M Composite Viper Jet 90mm

For sale is my beautiful FULL COMPOSITE JTM Viper Jet. Flies like a dream. Sleek. Quiet. Fast.

I'm established in the East Coast jet community for many years. 100% positive feedback. Buy with confidence.

Everything is FIRST CLASS on this build. I have about 25 flights on her, and everything was new when installed. The jet is also set up with full gear doors. Never crashed. Has a few very minor scratches and dings, but otherwise great condition.

RTF weight is 8.9 lbs. plus battery weight. I've been using Turnigy 40C 4000 mah blue packs in 12s config.

Sale includes:
JTM Viper Jet airframe 1.4M WS
JR 1221X DSMX rx
JR 370a gyro on rudd / steering
JePe Jets Storm fan 90 12s fan unit
Castle Creations 120A HV esc
Castle Creations BEC Pro
Eflite Electric retracts
TamJets Struts and pneumatic brakes
Robart pressure gage
MPI lite wheels and tires. (Tires have some wear because they're foam on asphalt. $16 for a new set)
ALL Hitec Digital MG servos on flight controls
ALL GENUINE JR extensions. No servos cut and soldered. Where possible, connections are saftied.
Spektrum TM1000 Telemetry unit
Spektrum pitot tube airspeed indicator
Slop free control surfaces.

Takeoff:

Landing:

Gear doors use 2 servos (1 nose, 1 main) that were programmed within my DX18 menu. Can include DX18 file if wanted.

Price lowered to $1,199 BNF! Only options: - $100 less rx. -$250 less fan unit. -$100 less ESC.

Will ship CONUS only via FedEX at your expense (figure $60-$120). I will build a crate for $25 in materials.

Will drive within a reasonable distance to meet ~100 miles.

Thanks for looking! -Richie

Last edited by MYHELL99; 07-20-2018 at 08:32 AM.
MYHELL99 is offline