Thanks Carsten. Just to be clear, I did not expect that the CTU calculations were the same as, or compatible with the numbers used by Gaspar's devices. And I am sure it will vary by specific engine and installation (that's why I included the setup info) .. especially with the Merlins where some have "classic" DC pump motors and some have the new digital/brushless motors. I just wanted to contribute a number for this one engine.
I have several Jetcat setups with Gaspar's devices (tele1/2/3 or FC) and I'm slowly converting to CTUs (just got two more from Danny last week) so it will be interesting to compare the "pre-calculated" (by the ECU) numbers from the Jetcats to the CTU. FWIW, I have found the Jetcat calculations to be pretty close, at least on the P200 and the P300.
Dave