RCU Forums - View Single Post - F 100 from "Mirce models" wooden kit
Thread: F 100 from "Mirce models" wooden kit
View Single Post
Old 09-20-2018, 04:51 AM
  #68  
mirce
 
Join Date: Feb 2007
Location: Senta, Serbia
Posts: 1,547
Likes: 0
Received 58 Likes on 29 Posts
Default
F 100 wings ( continuation )...

On bottom side first I add servo holders.
Servo carrier & cover - NS Modelers




Before planking with 3 mm balsa on the bottom side, I must insert in the wing pylon holders.
The previous step was to make the pylons.
One of offer from F 100 Super Sabre wooden kit is wing tank & pylon kit:
F 100 - wing tanks & pylons - NS Modelers





I made pylons first, take care you have left and right pylon!!!





Now parts which come into the wing...







After bottom side planking...







You can see on photos, front and rear pylon side are made from balsa. Ply plates give shape, so it is easy for sand.
Three bolts are for wing - pylon connection and two other holes are for wing tank.
mirce is offline  
Reply Like