Originally Posted by
mirce
Thank you for comments...
Here is weight in this stage without any equipment:
- right wing - 1730 gr
- left wing - 1768 gr
- elevators & elevators box - 1172 gr
- fuselage with aluminum wing joiner - 6588 gr
Total weight is: 11.344 gr
- pylons (both) - 136 gr
- 3D printed wing tanks (both) - 980 gr
With this parts, total weight is: 12.460 gr
Fuselage is 2865 mm long and wing span is 2500 mm.
When I spoke with Damiano, he told me that he don't add any weight in his F 100 Super Sabre!!!
OK, his model is with foam wings, rudder and elevators, and to be honest, I don't know what is weight of those parts.
Mirce
Mirce that is looking absolutely fantastic. Thank you for posting the weight this far. It gives me a better idea as to being able to build and fly with the AMA rules here in the USA. We are allowed up to 55 pounds with fuel. If weight is over that we have to have an experimental waiver for the jet. I really hope that it will be at the 55 pound weight or under with all equipment and fuel. I would really like to build this one.
Thanks
Joe