RCU Forums - View Single Post - Welcome to Club SAITO !
Thread
:
Welcome to Club SAITO !
View Single Post
03-15-2019, 08:05 AM
#
39401
Hobbsy
My Feedback: (
102
)
Join Date: Dec 2001
Location: Colonial Beach, VA
Posts: 20,370
Likes: 0
Received 25 Likes on
25 Posts
At 6,000 rpm
At half tank point
Great tool, just bolt onto an old case with aluminum foil sandwiched under it and cut away.
It bothered me having two paper gaskets under the cam cover, so made myself a tool called Happy Harry's Handy Dandy Cam Cover Gasket Cutout Guide. It worked perfectly. I cut a gasket out of aluminum foil to replace one of the paper ones. By the time the 14 oz tank was finished the tach was reading 10,770, I went to take a picture of the new tach numbers and my numb thumb and fingers popped the tach right into the prop. Tach is dead, prop unharmed. I got the 10.440 rpm reading about where the tank level is in these pictures. I'll be back
Last edited by Hobbsy; 03-15-2019 at
08:47 AM
. Reason: Finishing post
Reply
Like
Hobbsy
View Public Profile
Send a private message to Hobbsy
Find More Posts by Hobbsy
View iTrader Profile