A word of caution using floor wax as a release agent, specifically for bent strut landing gear. I wouldn't. Most floor waxes these days, like Future brand for instance have high acrylic content and dry very hard. Bent strut landing gear has to be removed by pulling it straight up out of the gear block holes so a softer wax is needed I think. Paste wax like Mother's with a high carnuba wax content would be a better choice imo.
You guys are riot, "crashing test stands". Funny, I thought I was the only one that had that happen. No problem, I just scabbed on some 1x4 to keep the rotten landing gear from falling off again.
Hotrod fa82b with its back turned to that other brand fs26