RCU Forums - View Single Post - EDF Thrust Vectoring Autonomous LEM (Lunar Excursion Module) Build
Old 06-29-2019 | 05:42 PM
  #6  
UN.RCONT.OL's Avatar
UN.RCONT.OL
 
Joined: Feb 2014
Posts: 415
Likes: 0
Received 6 Likes on 6 Posts
Default

Outdoors maiden… The first very short flight (or long crash landing) is before the fine tuning. The unit was uncontrollable because of the T. bowl effect. I did some further tuning after this flight, re-charged and hit the park. The wind picked up before the second flight but still wanted to give it a shot. The second flight was a success. The unit was very controllable despite the wind. Will need some further tuning but so far so good. My only concern is how the electronics will hold in a longer flight. This is one of the heaviest 64mm units that I have built, and the nozzle is equipped with 2 variable and 4 fixed vanes, packing the airway with lots of hardware. So, I will do a flight time test and see if the ESC, motor and the batteries will handle a full flight which will probably take 5 minutes.

The rest of the additions will need to be extremely light. I am not the best artist in town but will do my best to give it a genuine look

Thanks