Originally Posted by
XchosenlegacyX
Yeah I have traced the voltages, if you look you can see my little voltage marks on the board where I wrote the voltages lol. I will def see what load difference is with battery connected vs not, didn’t really think of that one . If I overvoltaged the board at one point, wouldn’t the first regulator be the one to pop, all my regulators seem to function or at least have continuity
One of the IC's might have blown or failed. I had an IC that blew it's bottom out, literally. I traced the problem to that chip and when I desoldered it the bottom of it was cracked and burned, couldn't tell until I pulled it out.