Originally Posted by acdii

Is that a 3.3 V6 or the Ecoboost? Either one are really good engines. There is a thread going on the F150 site, guy has somewhere around 400K on his little 2.7 EB, and only thing he had to do was replace some emissions valve for $80. Now you need a topper to protect the planes.

My prototype Giant Scale Corsair short kit is cut. Now to evaluate all the parts and make corrections where needed, and then see if I can reduce the amount of waste on the balsa. A few things left to do before I cut a retail kit, need to remove the part numbers, and come up with my own, as well as move the parts around so they aren't a mirror from the manual(which they actually are). I think $250 a kit should be reasonable. There is a lot of wood here. I wonder what size Saito will fly it.