Hi Guys.
I have a new P130Rx with a total of 16 runs on it now. The first 4 runs were uneventful but this weekend each of the 12 starts failed as the EGT never got past about 50 or 60C. After you realize its not going to start, just bringing the throttle and trim down and restarting the sequence results in a good start every time. So 24 starts for 12 runs. George at Dreamsworks / Jetcat had me take the Uaccel from 200 slowly to 250 but that did not fix the problem. The manual does not mention this particular error or the fix. Any ideas?
Thanks,
Dom