Hi Fuchstraumer, bit of possibly good news for you. Having spoke to Andrew the other day he has confirmed that he has asked his design team to look at adding ball bearings to all the roadwheels and idler wheels, as well as gearbox output shaft support bearings to support and stop drive sprocket wobble and reduce undue wear and tear on the gearboxes and drive train. There is also a requirement for idler adjustment in the mix as well. A sound-set for the Centurion is being investigated as we speak.
Unfortunately due to the current situation development of the Centurion has been knocked back a few months, add to that the worldwide financial climate at present and you can appreciate why Haya ltd is proceeding slowly and cautiously at present. However Andrew asked me to pass on his thanks for your input and interest in the Centurion project. He is happy to listen to past present and future customer feedback and input and will if practical and cost effective try and incorporate these ideas into his present and any future models.