RCU Forums - View Single Post - 3d flying
Thread: 3d flying
View Single Post
Old 11-10-2003 | 08:18 PM
  #2  
EXCAP232
My Feedback: (12)
 
Joined: Dec 2001
Posts: 1,319
Likes: 0
Received 0 Likes on 0 Posts
From: Frederick, MD
Default RE: 3d flying

There are many threads in this forum that deal with this subject. Try Horizon archives http://www.horizonhobby.com/
Jason Shulman and Frank Noll, Jr both have videos avalilable
http://www.jasonshulman.com/
Frank's is available from Carden http://www.carden-aircraft.com/
http://www.artistic-aerobatics.com/
http://www.mini-iac.com/main.asp

For learning there is nothing better than practice. Practice however doesn't mean just burning fuel. Add a notebook to your flight box. Plan for improving a particular skill at each session. Let's say you are uncomfortable flying inverted. Fly a figure 8 horizontal to the ground inverted in both directions. Practice slow flight and then reduce the altitude. Recover by ROLLING out not by elevator input.

EXCAP232

ORIGINAL: cliff600

I was wondering if there is a website to show or tell new how to do some tricks. What is the best way to learn them? I appreciate all the helpful answers and can do without all the smart tail comments