RCU Forums - View Single Post - Spark plug problems

05-01-2021, 02:19 AM

#3

PiccoLino

Join Date: Jan 2007

Location: Modena, ITALY

Posts: 124

Likes: 1

Received 1 Like on 1 Post

Actually the porcelain isolator of all the plugs that I replaced was dark brown. Even after I set it leaner, the colour didn't change much but I personally can't see some extra fuel destroy the plug electrode. I mean that the plugs I removed didn't spark at all, it wasn't like brush them clean and fly again; to the point that at first I thought the ignition was defective.
I would rather blame a too high temperature at that vey point of the combustion chamber but I haven't seen any evident sign of overheating when I disassembled it (to replace the original gasket) either.

Reply Like