Originally Posted by
the Wasp
I will only answer question #1,.. for sure put the sensors on the back of the engine because on the front they will get more cool air,, and,, I would put it on the back of the head about even with top of the compression chamber, it seams to me that will be hotter than the front and far enough away from the Exhaust port to get a more correct reading.
just my thoughts on, I'm not an expert on that stuff, so I may be wrong, and I didn't sleep at a Best Western last night.
Jim
Thats the same place I recommended, but being behind the head is a good tip too. The ones I have are loops that wrap around the head.