RCU Forums - View Single Post - prototype RC turbofan, two-spool
Thread: prototype RC turbofan, two-spool
View Single Post
Old 06-26-2021 | 09:49 AM
  #1  
ron_van_sommeren's Avatar
ron_van_sommeren
 
Joined: Sep 2002
Posts: 645
Likes: 0
Received 22 Likes on 17 Posts
From: Nijmegen / Nederland
Default prototype RC turbofan, two-spool
Two-spool turbofan.
AgentJayZ also comments.

The fuel tank is 2.5liter (absinthe, grenadine??).

The designer/builder wrote that fuel consumption is high(er) because too much fuel was used to lubricate the bearings:
www.rc-network.de/forum/showthread.php/727090-Effizienteste-Turbine?p=4754549&viewfull=1#post4754549

Static thrust a little over 12kg, the core is KJ66 based (8kg):
translate...www.rc-network.de/forum/showthread.php/727090-Effizienteste-Turbine/p=4755001

Channel
www.youtube.com/channel/UCvdOgVvlsngJ9oTP4BVckfA



ron_van_sommeren is offline  
Reply Like
The following 4 users liked this post by ron_van_sommeren:
cetigershark (06-26-2021), Desertlakesflying (06-26-2021), DST-Engines (09-09-2023), Viper1GJ (06-27-2021)