RCU Forums - View Single Post - What are you flying in IMAC?
View Single Post
Old 12-26-2021 | 08:26 AM
  #2  
speedracerntrixie's Avatar
speedracerntrixie
My Feedback: (29)
 
Joined: Jun 2010
Posts: 9,704
Received 200 Likes on 172 Posts
From: Happy Valley, Oregon
Default

I prefer any of the Extra 300 models. There is just something about an Extra that grooves better then others. My last one was a CARF 3M 330. I have also flown Aeroworks in both 100cc and 150cc, both were excellent. Current offerings from EF and Pilot are capable but IMO the control surfaces are too large which could be a disadvantage. If I were to buy an airplane today I would go with a Krill Extra. I however was given an old Aeroworks Edge and IMO if a buddy gives you an airplane you have to build it. I did however make mods to improve its IMAC performance. The fuselage was stretched 3”, the turtle deck was raised 1” and 3” was removed from each wing root. Still a couple months away from flight. Your collection are all tried and true designs.