QUOTE=Viper1GJ;12734041]3D printed fuel and air trap tanks[/QUOTE]
Great going!! When you find the PETG leaking try woodfil PLA and infuse it with epoxy. The wood filled print turns out porous and soaks up epoxy, becomes sort of a composite part, really neat. I use laminating epoxy heated with a hot air gun to make it even thinner.
Keep it up!
https://colorfabb.com/woodfill-the-original?gclid=Cj0KCQjw5ZSWBhCVARIsALERCvz6SOJ9sO_ gjR1awZrLnE8OmcmxhAA0ffkcN_7rPsJqLyaqSTuzL2waAmXsE ALw_wcB
