RCU Forums - View Single Post - Electronic solutions to modifying glow engines of all sizes to gasoline
Thread: Electronic solutions to modifying glow engines of all sizes to gasoline
View Single Post
Old 07-15-2022 | 05:31 AM
  #152  
cmulder
 
Joined: Jan 2005
Posts: 228
Received 4 Likes on 4 Posts
From: cork, IRELAND
Post this is how manny perry carb versions there are
Originally Posted by 1967brutus
II keep butting my head against the wall of the need for these things to be made to fit a particular engine and I don't know how to make it more versatile (how to ensure that the .45 size will actually be able to be fitted to ALL .45 engines, etc...)
Have a look here: Perry Pumps - Carbs

One thing i have no experience with is resin 3d printing. The required accuracy is trivial for those. Its more the question of the cured part is fuel proof or not.
Have a look at this service
https://www.pcbway.com/rapid-prototyping/.
There circuit boards are good but have not used there other services yet.



cmulder is offline  
Reply Like