After 2 months of 3D printing parts and quite a lot longer to assemble James' Abrams P-1 Explorer was ready for its first flight. He was just a little nervous but he needn't have been. It was an amazing success !
This fully 3D printable RC airplane was designed and developed by René Marschall and is available at PlanePrint.com
Wingspan: 1500 mm (59 inches)
Flight weight: 2100 grams (3S/2700MaH)
Wing loading: 50 g/dm2
Radio: 5-channel
Motorization: 3S
Material: PLA 800g/TPU 100g