RCU Forums - View Single Post - Powerbox Core radio and set up thread.
Thread: Powerbox Core radio and set up thread.
View Single Post
Old 09-28-2022 | 10:56 AM
  #1470  
AEROSHELDON's Avatar
AEROSHELDON
My Feedback: (99)
 
Joined: Mar 2002
Posts: 1,603
Received 98 Likes on 78 Posts
From: Castle Rock CO
Default
Originally Posted by David Gladwin
The idle current, no load, as measured on a Hangar 9 meter
at 6 volts is 04 amps.
400 ma at idle suggests you have some very serious control restrictions.
I have just set up an AW Sea Fury with 15 servos, including landing gear doors and I have got the total current down to 1.3 amps.
Servos are Savox1256, JR 8931s and Ditex. Etc.
This was with no servos hooked to anything. It was measured through a Powerbox Competition SR2, and maybe it was 04 amp and not 400 ma, that could be my poor conversion
AEROSHELDON is offline  
Reply Like