RCU Forums - View Single Post - 1/18 chassis build need motor/gearing and tires for
Thread: 1/18 chassis build need motor/gearing and tires for
View Single Post
Old 12-19-2022 | 12:12 PM
  #1  
testfly
 
Joined: Apr 2002
Posts: 436
Likes: 0
Received 4 Likes on 4 Posts
From: FLORIDA
Default 1/18 chassis build need motor/gearing and tires for
I am creating a 1/18 scale onroad chassis that I need to source some parts for. Mainly the motor, gears, ESC, rims and tires. The chassis design is cut from G-10 and has some 3D printed parts.
I am looking for info on where I can get the items needed to complete this project. I have included a image of some of the chassis parts. At the moment I have 7mm holes for the rear axle bearings. (3mm axle)
I need a motor and gears so I can add the holes in the frame rail for the motor. I am happy to share more details of this project if there is any interest.
I am also willing to share the stl and dxf files as soon as I have the car running.


testfly is offline  
Reply Like