Canadian Man

My Feedback: (1)

OLD kit (My kit) came with a chute kit. I sent this off to my friend and 3D Printing guy, JOE who made a copy of it. More to come on the install of these in upcoming videos.
He also spent some time improving the original chute kit which had some issues with the plunger design.



Single Turbine model tank layout. 2 saddles with 1 front tank. These tanks will be plumbed in series with front tank draining first, then one saddle, then last saddle.

Twin tank setup. 8L total. Way too much weight and fuel for the twin Xicoy 120 setup. We will be installing 2 lower tanks and 1 upper tank in middle. lower tanks fill first with both lower tanks going into upper tank.