RCU Forums - View Single Post - 1/5 scale K2 black panther tank
View Single Post
Old 05-08-2024, 03:08 PM
  #229  
PE YOUNG
 
PE YOUNG's Avatar
 
Join Date: Mar 2009
Location: SEOUL, KOREA, REPUBLIC OF (KOR)
Posts: 213
Received 62 Likes on 46 Posts
Default

The work has been delayed a lot because I'm on a business trip to Moldova, a country with beautiful scenery.
Maybe all the work will be done this week.


There was a broken tooth in the right bevel gear, so we replaced it this time

We reduced the length of the chain and removed the idler to ensure the life of the chain

Limit switch and rear area guide were installed to prevent the main gun of the turret from colliding in the rear area of the turret

The limit switch is installed at the bottom of the turret and is not visible from the outside after installation

We will complete the engine and power transmission modification work and complete the final top plate work

We replaced the newly purchased main gun with a servo that will control the top and bottom

Today, we will complete this update once we check the signal system of the turret and the operation of the servo