x-tal change
I've tryied changing the x-tal on my 9c module from 72.710 to 72.630.
that 72.630 is an old x-tal i removed from an old hitec fm i had.
tryied to work the radio on ppm mode with a matching reciever but as soon as i turned the radio on all the
servos start going crazy with no control.turn the radio off and it sattles down.
both tx and rx x-tals work on the old hitec, other x-tals work just fine on the 9c.
I'm lost.can't figure this out.i really need that freq.
help would be appreciated,
gabi