Robert,
The full line of options is available for the Majestic. This includes CF gear and wheel pants (included in the delux kit), honeycomb Nomex CF servo tray (NOT included in the delux kit, extra option), Kevlar/CF fuselage, and sheeted wings (contest grade sheeting, the same we use on our own wings) with pre-cut (routed) ailerons and elevators.

All that is left to cut on the control surfaces is a couple of inches that is not routed, sand even with the routed area and face them. The wings can be finished up in a decent work day or two.

All wood is included (le, te, control facings, formers, tips...etc.).

Of course, for a fee, ZN will provide an airplane painted and covered, completely ready for the installation of your equipment. A ZN finished airplane is truly a work of art (nicer than many of the airplanes that compete at the worlds). It takes 6-10 months to deliver a finished product and is not an inexpensive project, however, it must be seen to be believed. I know of one owner of a ZN finished airplane who looked at his new toy everyday for 6 months before deciding to fly it and make it "used".

I hope this information helps. Please feel free to ask questions regarding any of the ZNLine airplanes.

Sincerely,
Mark Novack