RCU Forums - View Single Post - gyro
Thread: gyro
View Single Post
Old 01-11-2004 | 03:40 PM
  #5  
Orson
Junior Member
 
Joined: Jun 2002
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
From: Montebello, CA
Default RE: gyro

Hi Ben
Thanks for your time and suggestion. Before I boxed this thing couple of years ago, it was flying fine with a steady heading. I have S3001 servos and FP-G154 gyro. The gain was always set at 7. For few seconds the tail is steady and then it goes back to it's wicked ways. At any rate, I will do a servo switcheroo and see what happens. If not corrected, Iam following your suggestions and replace both gyro and servo.
It's good to be back
Thanks again and happy landings.
Orson